How do you choose between inline and roller skates for practice?
Hockey on roller skates
To enhance responsiveness and accuracy, hockey skates are small and stiff. They make sharp bends, come back to life, and brake. In a nutshell, they’ve been put to the test!
The most important technological characteristics
Composite shell with a lot of strength (carbon, fiberglass)
Only use laces to tighten.
plates that are easily broken (aluminum or carbon)
Wheels:
4 Depending on the terrain, 72–80 mm
hey there (for example, 2 80 mm 2 76 mm)
A3000
Bearings with an ABEC rating of 5–9
Is (r) evolution possible?
Reign, Powerslide’s new 100% roller hockey brand, released three 100 mm hockey skates in 2016, allowing for greater rolling on big fields.
Downhill Rollercoaster
Downhill skating gorollerblades has always been dominated by roller skates with five wheels and tough shells. Downforce, braking control, accuracy, and support are all enhanced by the five wheels. For high speeds and emergency stops, the hulls are sturdy and precise.
The most important technological characteristics
Rigid plastic or composite shell
Extrusions of aluminum with 5 or 6 wheels
Wheels with a diameter of 584mm to 4110mm with a hardness of 85A/86A. Cyclists are increasingly utilizing 4100-4110 mm wheels while riding downhill.
Bearings with an ABEC rating of 5–9
There are just a few production models, but there is a lot of customizability!
Downhill variants, with the exception of the Seba brand, are rare on the market. You may build your own roller downhill bespoke with the assistance of a specialist business or experienced skaters.
Learn how to build your own low-cost downhill skates.
Skating on skates and figure skating
Because inline skates can’t perform as many steps and motions as quad skates, or conventional axle skates, continue to dominate roller figure skating and dancing (such as slices for example).
Stopper inline skates, on the other hand, should be increasing market share! A stopper is required for certain leaps. Only a few inline versions are currently available. Skaters often use picskates (manufactured in the USA) (made in the USA)
The most important technological characteristics
Skating, whether traditional or inline,
Leather shoe with a high, stiff heel.
The lace was laced up.
frons
The wheel sizes range from 55 to 63 mm. Depending on the soil type, hardness ranges from 78 to 94A.
Bearings with an ABEC rating of 5–9
What are the best skates for line art?
Roller skates that jump
While quads have dominated the sport of jumping for a long time, freeride skaters are gaining prominence. The reception is more consistent, but it is heavier and therefore more difficult to throw from the ground.
Slalom or freeride skates may be used.
The most important technological characteristics
Traditional and inline skating are both supported by a progressively increasing hull.
The frame is made of aluminum and is very strong.
Soft to medium-density wheels (78 to 85A)
ABEC 5–7 Tolerant Bearings
Slalom Slalom Slalom Slalo
Slalom skates that are stiff and have short plates for optimum maneuverability.
Keep in mind that speed slalom and freestyle slalom are two separate events. Speed slalom pros often utilize 3 100 or 3 110 mm frames.
Slalom freestyle
Shells that are stiff, hybrid, or semi-flexible
Aluminum-based stages (219 to 243 mm)
Depending on the terrain, 472 to 480 mm banana-shaped wheels are used (78 to 85A). However, the number of skaters in the 3100-3110 range is increasing.
Bearings with an ABEC rating of 5–9
Slalom is a kind of speed slalom.
Flexible or stiff shells are available.
Plates made of aluminum (243 mm to 247 mm)
Wheel diameter: 3100-3110 mm (83 to 86A)
Bearings with an ABEC rating of 5–9
Slalom Skate Selection
Freeride on a scooter
A hybrid of street and hiking skates with the resistance of the street type and large diameter wheels for city trekking and speed feats. The plate may rest on the walls or rails thanks to a soulplate or wedge on it.
The most important technological characteristics
Shell is stiff and has a cuff.
plates made of aluminum (243 mm approximately)
Wheels that are medium in size (76-84mm) and robust (82 to 86A)
Bearings with an ABEC rating of 5–7
hull guards on the sides
Extra-large dimensions
Three-frame freeride versions with 110 or 125 mm frames are getting more popular! On figures like slides, this construction accentuates speed and amplitude. They’re not quite as nimble as 480 skates, but they’re a lot more comfortable.
What to Look for When Buying Freeride Skates
Rollerblading on any surface
There are just a few models available. Previously, “Big Cat” Roces and “Coyotes” Rollerblades were utilized.
In recent years, Powerslide has picked up the torch with their Powerslide Vi SUV. Nordic Skates or ATR (all-terrain roller skates).
All of these skates have the ability to tow a rollerblade (land traction). All-terrain skates may be used for training in the woods, on trails, or on the downhill.
The most important technological characteristics
For optimum support, a stiff shoe with a high top is recommended.
Wheels with a diameter of 125-150 mm:
Three thicker metal wheels are included on the plates.
ABEC 5 or 7 “sealed” (rustproof)
Derby
In many respects, roller derby skates are comparable to racing skates.
Some companies, like as Bont, customize their goods to the needs of roller derby players.
The skates are designed to meet the same requirements as racing or rink hockey, but with additional safety. Skaters are often relaunched and redirected, much like on the ice.
The most important technological characteristics
Size:
semi-rising blocks (midcut)
low in terms of jammers
ensures enough ankle support (leather or carbon)
:
Newbies often utilize plastic.
For advanced users, the compact aluminum with slanted trucks offers more mobility.
Wheels are 59-63 mm in diameter and have a hardness of 88-95A depending on the soil.
A front stop with a short, height-adjustable height.
Bearings with an ABEC rating of 5–9
Rink-hockey
Quads in rink hockey are put to the test in games with a lot of starts, hard braking, and direction changes. To keep your ankles safe from firearms and sticks.
The most important technological characteristics
Skating is a must.
Stiff, semi-high shoe
100% tightening of the laces
Alu-truck with an alu-frame
Because of the small front brakes, rapid braking and relaunch are feasible.
Wheels with a diameter of 62-63 mm and a hardness of 88-97A
Bearings with an ABEC rating of 5–7
See the rink-hockey shoe composition table for further information.
Choose roller skates based on the complexity of the practice: Hiking as an example
You must first decide on the intensity of your practice before appropriately adapting the skate to the exercise. Let’s use “hiking” as an example. Nothing stands in the way of upgrading your equipment.
Practise
every two months You go for a short, leisurely stroll.
First-class service
Regular practice is essential.
You work out for 10–20 kilometers on each trip.
Roller skating is a competitive sport.
You go on well-known treks.
Confirmed
It took a lot of effort.
Weekly multi-hour treks of up to 40 kilometers.
You like to run fast and have a lot of stamina.
Expertise
Budget ranges from 45 to 90 euros. A budget of 90-200 Euros is required. Shell has tight budgets of 200-400 Euros and more.
a composite or a composite
a medium-sized plate
78-82A 80 mm soft wheels
3–5 ABEC semi-flexible bearings
plate made of aluminum or composite plate
Soft wheels with a diameter of 80-90 mm
Wheels 78-82A
Bearings with an ABEC rating of 5–7 are flexible.
a four- or five-wheeled aluminum frame
Wheels with a diameter of 80-100 mm
82-85A hard wheels
Bearings with an ABEC rating of 5 or higher
There are a variety of roller skate models to choose from.
Our roller skate catalog will show you the wide range of models available on the market today. It’s not an internet store, but rather a model database. This is not a comprehensive list. A product comparison may also assist you in selecting the finest skates for your needs.
Comentarios